Tips for Texture Coating

6 Useful Tips for Texture Coating and Its Benefits

Spread the love

Is there a wall in your house which is full of flaws and cannot be fixed with a layer of ordinary paint? If the answer is ‘yes’ and you want the surface to bear a tactile quality, you may choose texture coating. Whether you want a tactile surface, stucco or weathered look, textured coating is just perfect. Texture painting or texture coating is the paint specifically meant for the texture work and is as thick as the wet plaster or pancake batter. You must have noticed that some of the paints are gritty while others are not. All such paints are best meant for surfaces carrying flaws and for creating a beautiful rustic look.

Tips for Texture Coating

Steps to Texture Coating

Texture painting can completely conceal the flaws on the surface of the wall. It can help hide or camouflage the blemishes. Check out the following tips to texture painting:

  1. If the texture paint does not have any granules, you may use the special texture roller brush in order to apply the paint. Other options include a brush of urethane foam, a trowel. Make sure you only make use of a wide brush.
  2. Take the paint and smear it on the walls. The paint must be 1/16 inch in thickness. The painting of the walls is usually done in sections. Therefore, make it a point to focus on three-four feet square at a time and paint.
  3. Take one section at a time to create the surface design. It is best to choose a napped roller brush for the texture job as it renders a stippled and uniform effect. Similarly, you can use a foam brush to attain the stippling effect.
  4. Apply texture paint and move to the surface. Use the flat side of the brush and gently pat the paint to create valleys and peaks.
  5. After the coating is done on the walls, you may employ less conventional tools like a big sponge or crumpled wax paper. Take the coarse brush to create some swirls and circles on the paint. The texture and the thickness must be uniform when it comes to the sections of the paint. Overlap the borders when you move along the brush.
  6. If you are considering grit textured paint, you must buy the long-napped roller from the market. Follow the instructions given and then paint accordingly.

Important Benefits of Texture Coating

Texture painting provides a lot of benefits. It can conceal the flaws and enhance the design and appearance of the building. The following are some of the benefits of texture coating:

  • Texture painting offers aesthetic benefits. Texture painting and the tiles might be used to resemble textures of various materials such as stone, concrete, asphalt, and others. With the spurt in the variety of textures and finishes, architects can now meet all the demands of the clients. They may really create eye-catching designs to make your building simply unique and beautiful. You may go for the wrinkled surface or the low gloss finish to create attractive designs. In fact, both wrinkled and low gloss surface creates the magical appearance irrespective of the angle from where it is viewed. With texture painting, there is no need to worry about the dirt, dust, and debris getting trapped within the paint as it is easy to clean.
  • It is scratch resistant and so there will not be any appearance of a dent, oil canning, etc. If the area is a high traffic zone, this type of coating proves to be perfect as finger prints are not visible on these surfaces as it is on the flat painted walls.

The textured coating also delivers environmental benefits. Designers utilizing this kind of coating can qualify the units for tax savings and extra rewards. Most of the times the coating uses a solar reflective material to reduce the temperature of the building.

Leave a Reply

Your email address will not be published. Required fields are marked *